How practise I check and change backyard mower oil?

Quick Links:

  • When to Change the Oil
  • How to Check the Oil Level
  • Oil Change Steps

When you put fresh oil into the crankcase, it will exist a golden or bister color. Over time, heat, dirt and agitated air get into the crankcase causing the oil to darken. Nighttime oil is not only dirty; it has also lost much of its ability to coat and protect engine components.

When to Change the Oil

  • Every l hours of operation or after every mowing flavour
  • For a new lawn mower engine, you'll as well need to change the oil subsequently the get-go five hours of operation.
  • Besides check the oil every fourth dimension you employ information technology. Tough conditions such as wet grass, heavy dust, loftier temperatures and crude or hilly terrain, may increase the frequency of required oil changes.
  • The new EXi engines series™ from Briggs & Stratton® makes lawn mower oil maintenance easier than ever with Merely Check & Add™ Engines.

How to Bank check Oil Level

Checking the oil while the engine is cold and most of the oil is in the crankcase yields the about authentic reading.

For oil checking procedures on lawn mower applications, please lookout man our "Checking Engine Oil - Lawn mower Engine" video

Follow These Steps to Change your Oil

First, start by checking the oil level on your dipstick. The oil level of the dipstick should be between the two holes on the dipstick. Overfilling your engine can be just equally bad every bit using sometime oil so brand sure to check your dipstick level regularly.

Next, identify how to drain the oil on your lawn mower. This tin be done through the dipstick tube, drain plug or with an oil extractor tool. From at that place, it's time to drain the oil:

  • Run the lawn mower engine for 15 minutes to warm up the oil (imperative to remove all dirty debris from engine)

  • Plow off the engine and disconnect the spark plug wire

  • Drain the gas from the mower OR identify a plastic sandwich pocketbook over the gas tank and screw the cap on to prevent leaks

  • Insert the oil extractor tube and brainstorm to pump the oil out of the engine

One time you lot have removed all the old oil and placed information technology in a container, ready the container aside and after you are completed with the oil alter, accept this container to your nearest dealership where they tin can recycle your sometime oil.

Now, you can begin pouring in the clean, new oil. Cheque your operator's manual to decide which oil is best for your engine. In this video we used Briggs & Stratton SAE 30 Oil which can exist used for most small engines. In one case you cease pouring in the new oil, insert the dipstick in the tube and bank check to make sure the oil is at the correct level. When the oil is at the correct level, screw on the dipstick cap, put in new fuel if you removed it, and so reconnect the spark plug wire.

WARNING: Ever read the engine and equipment manual(s) before starting, operating, or servicing your engine or equipment to avert personal injury or property damage. See an authorized dealer if you are unsure of any process or accept boosted questions. Notice all Engine Rubber Warnings

Shop Related Maintenance Parts